Did you get a new bike with gears and everything? But there is only one problem- you do not know how to ride a bike. Well, let us fix that for you! Now, you can attach training wheels to those gear bikes, which should allow you to learn how to ride a bicycle effortlessly.
So, getting back to the question of whether can you put training wheels on a bike with gears? The answer is that you can! Here, you will learn everything there is to know about the topic, including how you can do the job, and which ones are the best training wheels.
All you have to do is keep reading.
The Importance of Training Wheels for a Newbie
For someone who is a novice, training wheels can be lifesaving. These simple products allow you to balance a bike, which is quite tricky if you have never ridden a bicycle. Also, having training wheels on a geared bike will give you the confidence to learn to shift gears without any issues.
By the way, do you want to know whether you can attach training wheels to geared bikes? If you do, then we have the answers for you in the next section.
What Are the Best Training Wheels for a Bike?
If you are looking for the best of the best training wheels for your geared bike, check out CHILDHOOD Bicycle Training Wheels. It’s one of the best in the market and has a very attractive look. You can also check BNKIHDD Bicycle Training Wheels.
Can You Put Training Wheels on a Bike with Gears?
Well, the straightforward answer is yes. You can attach training wheels on a bike with gears without any issues. There are several types of training wheels for several types of bicycles. Some training wheels come in varying heights as well. The height difference allows you to ride a bike in various scenarios.
But the first question that might pop into your head is why you would need training wheels on a geared bike. You see, for someone new to cycling, keeping balance as well as shifting gears simultaneously can be a tricky deal. So, using training wheels for the task could help you achieve the performance you desire.
Now that we know whether we can connect such wheels to a geared bicycle and what are the merits of doing so, it’s time we move on to the next section. Let’s find out how we can do the task with ease.
How to Put Training Wheels with Gears?
You see, putting training wheels on a bike with gears is no rocket science. All you have to do is follow the steps we have provided, and you should be good to go. So, without further ado, let us get started on the topic.
Step 1: Setting the Wheels up
If you have already bought a set of training wheels, then let’s get started with the attachment process. Your cycle should come with shoulder bolts. These are quite easy to locate. You have to attach the wheels to these bolts. Also, you should receive numerous accessories, which you will need to join to the shoulder bolt.
We suggest that you do it sequentially. The sequence should be-
- The wheels
- Flat washer
- Screws, nuts, and bolts
- The vertical bracket
Once you have finished connecting the bracket, start from step 1 all over again. By the way, this time, you might have to join a serrated bolt. After you are done with all these steps, we shall move to the next part.
Step 2: Position the Axles
After you have attached the washer, you should trace it along with the axle washer and the rear tire axle. Well, this is probably the most effortless task. Once you are done with that, it’s time that you shift to the next step.
Step 3:Make Sure That the Training Wheels are Functional
To do this, you have to do two things. First, place the bracket brace onto the bike’s axle. Make sure that you have properly inserted the tab into the cycle’s open frame.
Then, you need to spin the axle washer in the opposite direction. Doing so will make sure that the axle is loosely attached and will enable the bike to move freely.
Step 4: Reposition the Brackets
Once you are done with the previous steps, it’s time that you fix the height of the unit. You can do that by adjusting the height of the bracket. When you are doing this, ensure that the bracket is approximately 0.25-inches above the ground whenever the bike standing straight.
Thus, it should allow the unit to offer you the desired results.
Step 5: Tighten the Nuts & Screws
We are now approaching the end of the process. Since you are done with all the previous steps, it is time that we wrap things up. Using a crescent wrench, tighten all the bolts on your unit. For the screws, you can use the conventional screwdriver.
After that, you are done attaching one training wheel. All you have to do now is repeat the same process for the second one. When you are done with that, give your bike a test drive. If you are not happy, make small adjustments to the bracket and washer. That should be more than enough.
Final Words
If you have read the entire article, you should have adequate wisdom on how you can attach training wheels to bikes and what are the merits of doing so. Furthermore, you should know whether can you put training wheels on a bike with gears or not. Thanks to this, not only will you learn how to ride a bicycle, but also you will learn how to shift gears and ride a bike simultaneously. Happy riding!