Cycling is one of the best pastimes in the current century. To feel the wind sweep by while you breeze through the streets is truly a fantastic experience. From children to adults, everyone loves this activity, and it is an excellent exercise too.
However, if you’re a beginner, you will want your bicycle to have a peg because it will help you balance yourself.
If you own a BMX or a mountain bike, you will need to know how to put pegs on a bike with quick release. The process might seem tricky, but trust us, it will be rewarding too. Therefore, let’s get right into it and find out how to make a swift and smooth installation.
What Are Pegs?
Have you ever noticed the small cylinders coming out of the axle of your cycle wheels when cleaning it? Those are the pegs of the cycle. Pegs are vital for helping the riders center themselves on the vehicle.
Also, having this component around eliminates the possibility of falling off the bicycle substantially. It can even help reduce the chances of harm significantly in case of falling off the bicycle too.
Adding pegs to a quick release bicycle means that it will substantially receive a significant upgrade. It helps to massively increase its ability to pull off a wide variety of tricks and grinds. Most BMX, mountain bikes, and other bikes with quick release come with their pegs; you can also buy them separately.
Read More: Best Bike For Wheelies
Necessary Materials
- 3/8” axle rods
- Two 10mm wrenches
- Hacksaw
- Dense automotive grease
- Stainless steel BMX pegs
How to Put Pegs on a Bike with Quick Release
Here is a step by step instructions guide to help you easily put pegs on quick release bikes.
Step 1: Managing the Pegs
Start things off by grabbing the lip portion of the pegs and cut it off with the help of a hacksaw. Completing this task will help ensure that they can have a snug fit on the bicycle frame as soon as you screw them together. A more heavy-duty peg is preferable in this case than the more popular aluminum or plastic variations.
Sparing expenses in case of buying a peg can be particularly disastrous. After all, this component is in charge of supporting the overall weight of the entire vehicle. It will also support the rider’s weight when operational too.
Therefore, going for a sturdy frame is vital. Ensure that the peg is flushed before you install it. If you do not take this precaution, the frame will bend and damage the axle over time.
Step 2: Applying the Axle
First of all, it’s vital that you get the right axle for installing the peg. Not all axles can work on a peg and be able to grasp and strengthen it properly. To be on the safe side, go for the option having a length of 3/8” as they can accommodate most types of pegs.
Considering how hollow and narrow quick releases are, it’s best not to put the peg directly on it as it might break. Go for a more unorthodox approach and install a small shaft on the frame. This shaft can assist in holding the peg and supporting its weight with the body.
Step 3: Redeveloping the Hub
Once the peg is fitted to the shaft, it’s time to start reconstructing the bicycle hub. This part is very simple because all you will have to do is use a wrench to take off the back wheel, bring out the lug nuts, disconnect the loose bearings.
Now insert the axle through the hollow body of the hub. Use automotive grease to smoothen the process further and tighten the smaller pieces tightly.
Step 4: Reconnecting the Tire
Last but not least, you will need to put the tire back on the bicycle. Remount it properly and then connect the chain with it. Then screw the pegs to the axle and frame. Make sure that all the nuts and components are tightly put in and fit well on the peg. Do not miss out on any of the pieces, or else the peg might just fall off.
Conclusion
There’s no doubt that having pegs on your bicycle can be extremely beneficial for newcomers. It makes the ability to ride a bike becomes faster. Even a BMX stunt rider greatly appreciates having this component with their vehicle.
Now that you have read our article, you won’t have to worry about buying a cycle with no pegs. You can easily buy them separately and attach them to your bike too. You won’t have to worry about workshop expenses either! Learning how to ride a bicycle will never seem difficult ever again!
Related Articles:
